Pal Sphere 3D Printer Model
The file 'Pal Sphere 3D Printer Model' is (stl) file type, size is 52.1MB.
The file 'Pal Sphere 3D Printer Model' is (stl) file type, size is 52.1MB.
This Free Model is all that stands between you and finally catching that Alpha Mammorest!
If you enjoy the model, feel free to sign up for the mailing list to be informed of whenever new models are added to the shop!
Aguilarworkshop.com
Palsphere opens up for storage of whatever you'd like!
Features multiple print options for the filagree. One without supports and one with custom support built in. This thin support wall should be easily removable with pliers/snippers and should show up as a one wall thick skin in your slicer (this assumes you are using a .4 mm nozzle)
The Topper is a multi part assembly that is held onto the sphere via a printable screws.
There is a number of parts included to help you cast a resin sphere if you wish!
Further details and instructions can be found in the build guide.
| Pal-Sphere_-_Filagree_No_Support.stl | 24.1MB | |
| Pal-Sphere_-_Filagree_Pre-Supported.stl | 2.6MB | |
| Pal-Sphere_-_Locking_Sphere_Half_A.stl | 1.8MB | |
| Pal-Sphere_-_Locking_Sphere_Half_B.stl | 1.1MB | |
| Pal-Sphere_-_Mold_Half_A_Plug.stl | 1.6MB | |
| Pal-Sphere_-_Mold_Half_B_Plug.stl | 1.1MB | |
| Pal-Sphere_-_Mold_Negative_A.stl | 572.5KB | |
| Pal-Sphere_-_Mold_Negative_B.stl | 535.7KB | |
| Pal-Sphere_-_Mold_Shell.stl | 56.3KB | |
| Pal-Sphere_-_Simple_Half_A.stl | 31.8MB | |
| Pal-Sphere_-_Simple_Half_B.stl | 31.9MB | |
| Pal-Sphere_-_Sphere_Half_A.stl | 1.6MB | |
| Pal-Sphere_-_Sphere_Half_B.stl | 1.0MB | |
| Pal-Sphere_-_Topper.stl | 9.3MB | |
| Pal-Sphere_-_Topper_Insert.stl | 6.4MB | |
| Pal-Sphere_-_Topper_Screw.stl | 3.6MB |
