Paintbrush Holder With Folding Holder 3D Printer Model
The file 'Paintbrush Holder With Folding Holder 3D Printer Model' is (stl) file type, size is 329.5KB.
The file 'Paintbrush Holder With Folding Holder 3D Printer Model' is (stl) file type, size is 329.5KB.
Main deep compartments are to house paintbrushes, middle compartment to house small sponges, and misc paints in use.
Flip-open door can be opened to hold wet paintbrushes while painting, small hiding space in the back can be used to store sponges when not in use.
Make sure to print "Hinge Test small" or "Hinge Test Large" before printing the master file to make sure you can achieve the clearance.
"Hinge Test Large" is advisable for printing as is the most essential component, and should move 90* freely
MAKE SURE TO SELECT THE CORRECT MODEL
v.1 Paint Brush Holder (no magnets) - hold with gravity (might have some sagging issues with a lot of use)
v.2 Paint Brush Holder (with magnets) - Requires 1.6mm thick flexible magnet strip to be cut and glues to the appropriate slots, and to the main body.
| Hinge_Test_Large.stl | 148.9KB | |
| Hinge_Test_small.stl | 121.9KB | |
| Paint_Brush_Holder_no_magnets.stl | 537.8KB | |
| Paint_Brush_Holder_with_magnets.stl | 533.0KB |
