Paintball barrel plug with a built-in hex slot for an allen key.
The slot is sized for a TIPX velocity adjuster (3/16")
To assemble:
- Print the plug
- Cut off a piece of hex key about 1 1/2" long
- Glue the allen key in place, let dry for 24 hrs (I used gorilla glue. Anything that fills gaps will work well)
- Tie a piece of 4mm shock cord
- Optional: cover the hex tip with a rubber tubing (like the ones for aquarium air pumps) to prevent scratches
Please support my work by hitting like =)
.
.
.
.
.
Disclaimer: This is not an ASTM approved barrel blocking device, you are on your own to test it to the ASTM standards and use at your own risk
