This is my designed paint spinner. I used 5 skate bearings for the wheels inside the bottom.
This is modular. I have one printed 3 units tall and one that is 4 units tall. 5 would likely still be sturdy.
Per rack you need:
1 Bottom, 1 Pillar Base, 5 Wheel Pegs, 1 Wheel Plate, and 1 Pillar Cap.
Per rack level you need:
1 Pillar and your choice of Paint Disks.
The Small Bottle Paint Disk can store big bottles about every 3rd bottle with small in between.
The Wheel Pegs I print standing on end.
The Pillar and Pillar Base I flip upside down and print with supports set to "Touching Buildplate."
The Pillar Cap I print with supports set to "Touching Buildplate."
The rest shouldn't need support or any rotation.
| Big_Bottle_Paint_Disk.stl | 665.4KB | |
| Bottom.stl | 59.7KB | |
| Paint_Pot_Paint_Disk.stl | 1.2MB | |
| Pillar.stl | 789.3KB | |
| PIllar_Base.stl | 589.8KB | |
| Pillar_Cap.stl | 603.4KB | |
| Small_Bottle_Paint_Disk.stl | 606.2KB | |
| Wheel_Peg.stl | 32.6KB | |
| Wheel_Plate.stl | 152.8KB |
