Paint Rack Holder V3.1 – Two Thin Coats 15ml Bottles 3D Printer Model
The file 'Paint Rack Holder V3.1 – Two Thin Coats 15ml Bottles 3D Printer Model' is (stl) file type, size is 3.0MB.
The file 'Paint Rack Holder V3.1 – Two Thin Coats 15ml Bottles 3D Printer Model' is (stl) file type, size is 3.0MB.
This is a remixed version of the Paint Holder V3 - specifically aimed at fitting the 15ml bottles sold under the Two Thin Coats brand. The redesign is not as polished as the original, but seems to fit the bottles snugly during my tests.
Recommend printing with a minimum of 3 perimeter walls and 20% infill for strength. All of mine were done with 0.28mm layer height on a Bambu P1S, but you may want to stick to a regular 0.2mm layer height on other printers.
All other information is as the original, although I've included a new base piece with a slightly wider hole (0.05mm wider) as I was finding I was having to ream out mine with a drill bit.
Can be mixed and matched with the original Vallejo/Citadel paint racks.
| Base_Wide_Hole.stl | 993.4KB | |
| Bottom_Rack_for_TTC_15ml_Bottles.stl | 1.5MB | |
| Rack_for_TTC_15ml_Bottles.stl | 5.9MB | |
| Washer.stl | 137.7KB |
