Paint Rack For Pentart/LaBlanche Colors 3D Printer Model
The file 'Paint Rack For Pentart/LaBlanche Colors 3D Printer Model' is (stl,dxf) file type, size is 15.6KB.
The file 'Paint Rack For Pentart/LaBlanche Colors 3D Printer Model' is (stl,dxf) file type, size is 15.6KB.
In order to organize my color chaos a bit, I needed a rack to store my colors neatly.
My Pentart and LaBlanche paints in particular presented as a challenge as I couldn't find a suitable storage alternative. So I designed a corresponding rack.
I developed the rack for an xTool D1 and chose 3mm MDF for material.
The rack is intended as a pure plug-in system and does not require any glue or anything similar.
To build the rack you need the following cuts:
2 x Wall Element
4 x Shelf Back
4 x Shelf Base
2 x Side Element
At this point, I will not provide assembly instructions because it is self-explanatory.
If not, you should maybe find another hobby. :)
I will also provide a printable alternative for larger printers (CR 10 max, Chiron, etc., min 400mm), but I will not test it because I think the lasered alternative is better.
If you print it, please let me know if it fits. I would do it in PLA to take advantage of the rigidity of the material.
Happy lasering or printing.
| Rack_shelf_back.stl | 13.9KB | |
| Rack_shelf_back_3.2_MDF.dxf | 4.9KB | |
| Rack_shelf_base.stl | 25.7KB | |
| Rack_shelf_base_3.2_MDF.dxf | 4.1KB | |
| Rack_side_element.stl | 13.0KB | |
| Rack_side_element_3.2_MDF.dxf | 6.0KB | |
| Rack_wall_element.stl | 10.0KB | |
| Rack_wall_element_3.2mm_MDF.dxf | 3.1KB |
