Two-Tiered Paint Palette with 7x2 paint slots, a central mixing spot and two adjacent water-reservoirs.

Dimensions:
The bottom part is 20cm in diameter. The paint slots are 4cm in diameter. The mixing spot is 9cm in diameter.
The bottom and top part are both 1,5cm thick, and all cavities are 1,3cm deep at their deepest.

Note:
There is a 7,5cm gap between the highest point of the bottom part and lowest point of the top part - this was my personal preference. If you want it shorter or lower, just create a cylinder with 1cm diameter and add whatever your preferred length is to 2,3cm (the combined length that the rod inserts into both in the bottom and top part).
Example: Preferred height 10cm. 10+1+1,3 = 12,3cm length cylinder.

Final note: I have included a bottom part with no cylinder holes (named: Palette_Bottom_no_column_holes.stl) if you just want 7 paint slots and dont want to add the top part.

Enjoy and happy painting.

If you really enjoy my design and want to support me, you can buy me a coffee!
https://ko-fi.com/kdesigns101