Paint Palette Turntable Made Using Empty Filament Spool And Milk Bottle Lids 3D Printer Model
The file 'Paint Palette Turntable Made Using Empty Filament Spool And Milk Bottle Lids 3D Printer Model' is (stl) file type, size is 2.3MB.
The file 'Paint Palette Turntable Made Using Empty Filament Spool And Milk Bottle Lids 3D Printer Model' is (stl) file type, size is 2.3MB.
A free-spinning turntable which holds milk bottle lids as removable and interchangeable paint wells.
The milk bottle lids seem to be standard across brands here in the UK. I tried Iceland, Co-op, Cravendale and the local corner shop and all lids are 40mm in diameter.
The filament spool is Amazon's Basicfil brand. I used the 500g size. The part of the turntable which fits into the centre hole of the spool is 52mm outer diameter.
I made the seven spoke version for myself but have also uploaded 8, 9 and 10 spoke versions. Please note I haven't printed and tested these versions but have no reason to suspect that they would not work.
I have also made some drawers that will fit in the gap of the filament spool to hold small knick-knacks. They push in fairly tight to make sure they don't slip out. The version here is for the 500g spools with a height of 37mm. If you want to use the 1kg spool, you will need to resize the Z axis only in your slicer to the correct height.
I have also made a handheld paint palette which uses milk bottle lids which you can find here:
https://www.thingiverse.com/thing:4771826
I have made a spiral version too:
| Palette_turntable2_10_spoke.stl | 2.2MB | |
| Palette_turntable2_7_spoke.stl | 1.7MB | |
| Palette_turntable2_8_spoke.stl | 1.8MB | |
| Palette_turntable2_9_spoke.stl | 2.0MB | |
| spool_drawers_37mm.stl | 51.8KB |
