This is a stand to fixed thepadlock in your motorbike.
the tube of the chassis must to be of 20mm of diameter and the locker 30mm width MAX with the piston of 13mm diameter MAX.
You will need support only in the "soporte candado"
You should to make this support with ABS or PETG, because the PLA is too fragile and the water doesn't it feel good.
For more safety you can use a metal plate and I will be sure that it won't break.
| abrazadera2.STL | 54.0KB | |
| soporte_candado2.STL | 43.8KB |
