Packout Rail Deluxe 3D Printer Model
The file 'Packout Rail Deluxe 3D Printer Model' is (stl) file type, size is 25.3MB.
The file 'Packout Rail Deluxe 3D Printer Model' is (stl) file type, size is 25.3MB.
This is a work in progress and I have more accessories planned. Leave a comment if you have something specific you would like to see added.
These fasten to the extruded aluminum rails on most packout boxes and drawers.
The BASE pieces are for holding 1/8" by 2" flat stock. You can use Aluminum or Steel, as fits your application.
Start at one corner with an END and use the MIDDLE pieces if you would like to wrap around a corner.
The ACC pieces are designed to attach to the rails.
The SPACER is to help hold your BASE pieces higher or wherever you want without needing to make holes in the original extrusions, so as to not damage them and lessen their structural integrity.
| PRD_ACC_1inHook.stl | 144.2KB | |
| PRD_ACC_2inHook.stl | 144.2KB | |
| PRD_ACC_Cupholder.stl | 26.5MB | |
| PRD_ACC_LargeBin.stl | 2.1MB | |
| PRD_BASE_END.stl | 29.0KB | |
| PRD_BASE_END_CLOSED_SET.stl | 7.8MB | |
| PRD_BASE_END_OPEN.stl | 4.0MB | |
| PRD_BASE_MIDDLE_CLOSED.stl | 3.9MB | |
| PRD_BASE_MIDDLE_OPEN.stl | 9.5MB | |
| PRD_RAIL_SPACER.stl | 4.8KB |
