Pachacuti Mk.1.1 FF Rocket Engine 3D Printer Model
The file 'Pachacuti Mk.1.1 FF Rocket Engine 3D Printer Model' is (PDF,STL) file type, size is 28.9MB.
The file 'Pachacuti Mk.1.1 FF Rocket Engine 3D Printer Model' is (PDF,STL) file type, size is 28.9MB.
I made this as a challenge for myself, it's the first rendition of a scale model of a full flow methane oxygen rocket engine that I conceived myself. I used pre existing engines as guides to build it, it's largely grounded in the SSME and BE-4 engines.
The model has a fully built interior with modelled turbopumps and injector systems (I can upload the various components if there is an interest in them, although I should mention there are over 500 individual components but I could upload the main ones and the primary sub assemblies if it's requested).
One of the reasons I started this project was because I felt that it would be an incredible idea to have a model rocket motor in the reach of any student interested in aeronautical engineering.
There's a thread that I put up about the engine here: http://forum.nasaspaceflight.com/index.php?topic=39200.msg1468297#msg1468297 There's also a lot of the designs as sheets there as well, which is helpful to demonstrate the inner workings of the engine.
| Channel_Wall_Nozzle_V1.0_2.PDF | 323.1KB | |
| Combustion_Chamber_Assembly_V1.0.PDF | 87.9KB | |
| Engine_Assembly_Higher_pressure_TP_full__V1.1.STL | 21.4MB | |
| Engine_Assembly_Higher_pressure_TP_lower_V1.1.STL | 29.8MB | |
| Engine_Assembly_Higher_pressure_TP_test_V1.1.PDF | 330.7KB | |
| Engine_Assembly_Higher_pressure_TP_upper_V1.1.STL | 8.3MB | |
| Injector_Assembly_V1.0_CC.PDF | 152.8KB | |
| Preburner_Assembly_exploded_Mk.1.0.PDF | 121.3KB | |
| Preburner_document_Mk.1.0.PDF | 156.0KB | |
| Turbopump_Assembly_document_V2.0.PDF | 224.5KB | |
| Turbopump_Assembly_Exploded_View_V2.0.PDF | 108.3KB |
