This is a remix of 2 pre-existing models by Terrry_Rist and AngelshipAC130 combined and then with my twist.
I didn't like that the M4 mag was pointing straight up so I changed it to 70 degrees instead. It didn't really fit on my printer so I had to print it at a 45* angle on both x and z axis.
i printed it at 101% as well and everything fits perfectly.
Edit: I noticed that I gave the pipe a little to much play, so you might have to put something inside, like a tube or something. I cut a pencil in half and shoved it in there.
Edit2: I have made some changes to the adapter that hopefully will fix the problems with the first one. but i will not print the new one so the old version will stay just because i know it can be fixed after print.
| guide_v1.stl | 252.8KB | |
| p90_mag_m4_adapter.stl | 2.4MB | |
| p90_mag_m4_adapterv2.stl | 2.6MB | |
| p90_mag_release_lever.stl | 63.9KB | |
| p90_mag_release_pin.stl | 12.0KB |
