Overwatch Keycap For BOX SWITCHES (Gateron/Kailh) 3D Printer Model
The file 'Overwatch Keycap For BOX SWITCHES (Gateron/Kailh) 3D Printer Model' is (stl) file type, size is 44.4KB.
The file 'Overwatch Keycap For BOX SWITCHES (Gateron/Kailh) 3D Printer Model' is (stl) file type, size is 44.4KB.
Remix of the less-pronounced Overwatch keycap model, just with a different switch fitting. Fitted for BOX keycaps! That's Gateron / Kailh. Had issues fitting the original model to my Aula F99 keyboard, so I made this. Comment if you'd like the key switch fitting model alone, wouldn't be too difficult to transfer it to other keycaps.
*The model may give an integrity error issue. Using Creality slicer, I just clicked "repair" and that did the trick.
*I recommend you set the seam position to "nearest". Gave the best results for me, positioned in the top left of the keycap, where it's entirely out of view.
*Infill is most likely entirely preference. I left it at default 15%, works fine. The PLA I used is translucent enough to show RGB through the keycap.
*I selected "Concentric" as the top surface pattern, just thought it looked best. Fills out the design well.
| Overwatch_Keycap_for_Box_Switch_3_Repaired.stl | 130.9KB |
