HS VERSIONS ARE FOR HEAT SET INSERTS
Remixed from my old 25 mm paint rack!
A folding rack to hold 30 34mm bottles of miniature paint, with parts to make them 3, 4, 5, or 6 slots wide! If you want multiple units to stand near each other you can put a long leg on one side of all of them and a short leg on the other.
Needs 16 x 10mm long m3 screws to attach rails to rack pieces, and 4 x 18mm long m3 screws to attach legs. Screws should be able to be tightened against the bushings and still allow the rail to move. Though I have 2 lengths of the bushing if the normal one is too tight (should be printed at 0.1 mm to get the last layer.) For the non heat set nut version you can tap the plastic for the m3 screw.
All parts are printable without supports.
The shape of the slot on the legs is useful for locking them in the out position, they move about halfway out when tilting the unit, but need to be moved manually the rest of the way.
2020/05/16: Updated assembled view to current model, corrected length of bushings, updated screws, corrected quantity of rails.
2020/05/18: Finalized parts, Renamed for convenience. Added3, 4, and 5 slot wide versions.
| hs_tray_left_3_x2.stl | 1.8MB | |
| hs_tray_left_4_x2.stl | 2.2MB | |
| hs_tray_left_5_x2.stl | 2.8MB | |
| hs_tray_left_6_x2.stl | 3.2MB | |
| hs_tray_right_3_x3.stl | 1.8MB | |
| hs_tray_right_4_x3.stl | 2.2MB | |
| hs_tray_right_5_x3.stl | 2.8MB | |
| hs_tray_right_6_x3.stl | 3.2MB | |
| leg_bushing_longer_x4.stl | 83.7KB | |
| leg_bushing_x4.stl | 70.8KB | |
| leg_left_long_x1.stl | 46.6KB | |
| leg_left_x1.stl | 67.6KB | |
| leg_right_long_x1.stl | 46.6KB | |
| leg_right_x1.stl | 67.6KB | |
| paint_stand-up.stl | 5.2MB | |
| pivot_bushing_longer_x16.stl | 79.4KB | |
| pivot_bushing_x16.stl | 79.4KB | |
| rail_x4.stl | 152.6KB | |
| tray_left_3_x2.stl | 1.7MB | |
| tray_left_4_x2.stl | 2.1MB | |
| tray_left_5_x2.stl | 2.7MB | |
| tray_left_6_x2.stl | 3.1MB | |
| tray_right_3_x3.stl | 1.7MB | |
| tray_right_4_x3.stl | 2.1MB | |
| tray_right_5_x3.stl | 2.7MB | |
| tray_right_6_x3.stl | 3.1MB |
