OVER THE TRACK SHED 3D Printer Model Free Download

Description Files (7)

Summary

OVER-THE-TRACK SHED OO/HO

UPDATED VERSION HERE https://www.thingiverse.com/thing:4883711

This 'shed' was designed to stand on a platform above a track on my overcrowded railway. It is intended to partially hide the point at which the track goes through the backdrop.

It prints in four parts - the shed, the fence, the steps and the base. The shed could be used without the base.

Files:

Hut_Mk1. The version shown in the photos.
Base.
OVERHEAD SHED LEFT. As Hut_Mk1.
OVERHEAD SHED RIGHT. Double windows and door on opposite side.
vertical fence. This prints standing upright. This is the version I have used for my own model.
horizontal fence. This is the 4 sections of fence set up to print flat. (untested)
steps The steps print in one piece. I found I needed to slow my printer down in order to get a decent print. Use a brim.

I'm happy with the quality of print.
I'm never quite sure if I've got the scale right but it looks okay. The door measures 24mm high which equates to 1.8 metres. The fence measures 13.7mm high.
I printed the shed part with a brim because of the corrugations.
I printed the vertical fence with a brim for adhesion.
Print steps with a brim and on a slower print speed.
The base prints inverted.

I hope this will be useful to someone.
Please comment or message (politely) if there are any issues or desired modifications. I will attempt a fix or extra versions if I can. I am working on steps that print in sections.
Please post any successful 'makes'.

Extra bits and variants will probably be added over time if requested.
I have uploaded a second version of this that includes a spiral staircase at https://www.thingiverse.com/thing:4883711

base.stl	668.1KB
horizontal_fence.stl	424.1KB
Hut_Mk1.stl	780.0KB
OVERHEAD_SHED_LEFT.stl	780.0KB
OVERHEAD_SHED_RIGHT.stl	780.0KB
steps.stl	712.9KB
vertical_fence.stl	442.7KB

OVER THE TRACK SHED 3D Printer Model

Summary

Tags

You might also like