Oval shaped bangle/bracelet with stars motif. Hi poly/smooth finish. Looks great if printed with metallic look or silk PLA/ PLA+. Cross section of the bangle is also oval shaped . Only needs approx. 40mins to print and only approx. 5g of filament. A quick fun project.

Inside dimensions 80mm x 56mm. Can scale as necessary to fit over hand easily. Oval cross section 8mm x 4mm (V2) and 9 x 6mm (V3). If there are enough downloads/likes I may add other sizes.

IMPORTANT : suggest to use BRIM type build plate adhesion option to ensure enough first layer adhesion.

I used 0.2mm layer height, 200C print temp and 60C bed temp. Suggest to use Silk PLA/PLA+ or PETG as these are less brittle than normal PLA/PLA+.

⚠Warning⚠

Be careful in environments with young children and pets!

This model contains small parts.

If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury.

If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!

Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries.

In addition, debris from damage to the model may be accidentally ingested by infants or pets.

If the model is damaged, dispose of it immediately.

Store them in an appropriate place.

After 3D printing, store the model in an appropriate place out of reach of young children and pets.

Proper adherence to the precautions will ensure the safe use of the model.