The Rockwell OV-10 Bronco was built as a light attack and observation aircraft and renowned primarily for its Close-Air Support capabilities. It is capable of carrying over 3000LB of external munitions, along with internal space for paratroopers or stretchers. They can still be found flying around here and there, including some use in fire suppression!
While the Bronco still flies in some smaller militaries around the world, it is gradually being phased out by the newer Embraer A-29 Super Tucano!
Included is the standard fit, same as past kits, but also a tighter (labelled Ti) variant as I know some of you find them too loose!
For those uninterested in the card format, there are frameless variants included, alongside the individual part files!
If printing individual parts, be sure to include 2x Bronco_Hardpoint, 2x Bronco Hellfires, and 2x Bronco_Boom!
Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit.
The model parts are 1.8mm high, which is not divisible by 0.16 for example!
Be sure to print with 100% infill for it to hang straight as the weight distribution can be sensitive!
Makes greatly appreciated, always glad to see them! Happy Printing!
Interested in selling?
All files are marked as non-commercial along with any remixes created from them.
If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships!
| Bronco_Boom.stl | 18.8KB | |
| Bronco_Connector-A.stl | 5.7KB | |
| Bronco_Connector-B.stl | 8.1KB | |
| Bronco_Fuselage.stl | 33.3KB | |
| Bronco_Guns.stl | 22.3KB | |
| Bronco_Hardpoint.stl | 7.1KB | |
| Bronco_Hellfires.stl | 11.0KB | |
| Bronco_Kit.stl | 1.2MB | |
| Bronco_Kit_Frameless.stl | 193.8KB | |
| Bronco_Prop.stl | 13.2KB | |
| Bronco_Tail.stl | 3.8KB | |
| Bronco_Wings.stl | 21.4KB | |
| Ti_Bronco_Kit.stl | 1.2MB | |
| Ti_Bronco_Kit_Frameless.stl | 191.1KB |
