Outstanding Numbers 3D Printer Model
The file 'Outstanding Numbers 3D Printer Model' is (stl) file type, size is 701.2KB.
The file 'Outstanding Numbers 3D Printer Model' is (stl) file type, size is 701.2KB.
Outstanding Numbers were developed at the request of another Thingiverse member who wanted printable numbers to suspend from balloons and/or mount on a base to use as a trophy. These easy to print digits can be made as/when required for fun and to recognize an achievement or anniversary.
In addition to all 10 digits files have been included to mount either one or two as a trophy or prize. The bases have adjustment holes to allow the digits to be centred / spaced evenly. They an also be strung from a balloon (Using the spacer when suspending two numbers under a balloon is recommended).
Print the numbers in any colour then pause at approx. 85% print progress to change the filament so the raised inner areas print in a different colour. It's easy... just watch for these inner surfaces to start building above the main number then pause / change.
Although these are easy to print please refer to the print instructions and images for additional information.
Note: If you like these check out the rest of my practical and fun designs.
| 0.stl | 237.8KB | |
| 1.stl | 56.3KB | |
| 2.stl | 169.9KB | |
| 3.stl | 241.4KB | |
| 4.stl | 70.2KB | |
| 5.stl | 194.2KB | |
| 6.stl | 244.5KB | |
| 7.stl | 73.2KB | |
| 8.stl | 350.4KB | |
| 9.stl | 259.2KB | |
| link.stl | 57.9KB | |
| pin.stl | 60.0KB | |
| stand-1.stl | 106.9KB | |
| stand-2.stl | 189.4KB |
