This Boat is obsolete! Please Visit my page for version 6!

Well, this is still under construction! Eventually this boat will be all 3d printed.
Currently I have not added power or equipment, and this is ONLY a floating model at the time being!
When this boat is complete, it will only need electronics, prop, and motor shaft. It is meant to be a racer, and will be able to fit up to a 25x25mm outrunner between 2400-3200kv. It will use the Horizon Hobby ProBoat components for drive shaft, coupler, and prop. The design is public and open source and I Encourage all of us to share and update this thing. Lets make a fun, fast, and easy to build pond boat!
For more info you can follow the thread at:
http://www.rcgroups.com/forums/showthread.php?t=2231485
If you Print this thing, please take some photos and leave some feed back! If you make changes, please send over or post the files for future use, or adaptation to the current file!
NOTE: Do not download the Boat Prelim_2.STL, It is not a compatible file, and was only uploaded to provide a 3d thingview of the final product. Also, I included both the original .STL, as well as .STL fixed from NetFabb. I know different software does and does not like different files... I for one have no problem with either the fixed or the original. The Fixed files are located in a .Zip folder.