Ouija Board 3D Printer Model
The file 'Ouija Board 3D Printer Model' is (stl) file type, size is 8.2MB.
The file 'Ouija Board 3D Printer Model' is (stl) file type, size is 8.2MB.
I was going to upload this 3d model this past Halloween, but I never got around to finishing it. Please download and print this at your own risk! I am not held responsible for anything bad that happens after using this or if you happen to open a portal to hell summoning demons that eat your soul! YOU HAVE BEEN WARNED!
The objects are proportional to each other, if you scale one object up or down, you need to match the scale for all of them. You will need to print out 3 legs and glue them or acetone fuse them on. You can print the lens with clear filament and use an old rusty nail to put through the lens. This might look good printed in wood filament.
I made this using the 3dp.rocks Lithophane generator and modified it. You can visit the site here:
http://3dp.rocks/lithophane/
| ouija_debossed.stl | 15.5MB | |
| ouija_embossed.stl | 15.5MB | |
| planchette.stl | 6.3MB | |
| planchette_leg.stl | 17.5KB | |
| planchette_lens.stl | 26.3KB |
