OTTO QUAD 3D Printer Model
The file 'OTTO QUAD 3D Printer Model' is (zip,stl,txt,pdf) file type, size is 4.3MB.
The file 'OTTO QUAD 3D Printer Model' is (zip,stl,txt,pdf) file type, size is 4.3MB.
OTTO DIY remixed with MINI KAME = OTTO QUAD
Parts required for Otto Quad,
8 x SG90 SERVOS
1 x Arduino NANO (atmega328 version)
1 x Arduino NANO I/O shield
1 x HC SR04 ultrasonic module
1 x MAX7219 dot matrix module
Female to female hook-up wires
1 x 5V buzzer
1 x HC-05 Bluetooth module (optional for use with Android APP)
1 x LIPO battery 3.7volt and a suitable DC-DC converter module ESSENTIAL as this robot needs at least 2Amps at +5volt
I also used a GSTDUINO PCB (instead of the Arduino Nano and shield, OPTIONAL)
This is a work in progress, the sketch and Android APP will change as I work on perfecting the functionality
You will to print:
1 x Head (two versions available, Nano I/O shield and GSTDuino)
1 x Body 7 A (body)
2 x M-Hips (Legs)
2 x M-Hips SHAFTS (Pins 4 needed in total)
1 x M-Body SHAFTS (pins 4 needed in total)
2 x Single_foot_typeA
2 x Single_foot_typeB (feet)
| Android_APP.zip | 3.8MB | |
| Body_7A.stl | 354.1KB | |
| Head.stl | 159.3KB | |
| Head_NANO_SHIELD.stl | 159.3KB | |
| m-body-shafts.stl | 40.7KB | |
| m-hips.stl | 339.5KB | |
| m-hips_SHAFTS.stl | 48.5KB | |
| READ_ME.txt | 985.0B | |
| Single_foot__typeA.stl | 143.0KB | |
| Single_foot__typeB.stl | 143.0KB | |
| SKETCH.zip | 102.6KB | |
| tCad2_OTTO_QUAD.pdf | 129.3KB |
