Oster Fast Feed Clipper Comb 3D Printer Model
The file 'Oster Fast Feed Clipper Comb 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Oster Fast Feed Clipper Comb 3D Printer Model' is (stl) file type, size is 1.2MB.
This is a Replacement Comb set for a Oster Fast Feed Clipper. I had once upon a time download all the combs I could find that might fit this model and none worked right. I finally got this dialed in. It fits great and does not bind or hit the blade or lever.
The 1/8th inch I generated with fewer teeth than the original... let me know if that needs to be different. It has the same qty as the other sizes.
I printed it in PLA. My blades are a bit narrower than the original, but that allows more hair to pass through. This version should be printable at .2mm with no supports... I printed V2 at .15 and found the bottom curves to be better defined.
If you printer has issues with some of the small overhangs just add supports. I printed it bottom of the blade down on the table. You may want to brim since the only touch point under the blades is one or two lines.
V2 has some better refinement in features and a less sharp point at the front.
V3 files I made the slide on tighter and cut back again the space to the blades.
2/14/2023 I am posting a 1" I did not print it and I don't know how reliable larger depths would be. You would have to be careful to no roll off the back where the blade closer than 1".
| My_comb_Design_Oster_Fast_1-2inch_Comb_V2.stl | 369.3KB | |
| My_comb_Design_Oster_Fast_1-2inch_Comb_V3_12-6mm_Tighter_Fit.stl | 370.1KB | |
| My_comb_Design_Oster_Fast_1-4inch_Comb_V2.stl | 358.8KB | |
| My_comb_Design_Oster_Fast_1-4inch_Comb_V3_6-3mm_Tighter_Fit.stl | 359.6KB | |
| My_comb_Design_Oster_Fast_1-8inch_Comb_V2.stl | 385.2KB | |
| My_comb_Design_Oster_Fast_1-8inch_Comb_V3_3-1mm_Tighter_Fit.stl | 392.7KB | |
| My_comb_Design_Oster_Fast_1-inch_Comb_V3_25-4cm_Tighter_Fit.stl | 282.3KB | |
| My_comb_Design_Oster_Fast_3-16inch_Comb_V2_4-5mm.stl | 377.0KB | |
| My_comb_Design_Oster_Fast_3-8inch_Comb_V2.stl | 414.5KB | |
| My_comb_Design_Oster_Fast_3-8inch_Comb_V3_9-5mm_Tighter_Fit.stl | 415.1KB |
