Orthogonal Printed Linear Stage 3D Printer Model
The file 'Orthogonal Printed Linear Stage 3D Printer Model' is (STL) file type, size is 473.8KB.
The file 'Orthogonal Printed Linear Stage 3D Printer Model' is (STL) file type, size is 473.8KB.
This design is an orthogonal printed linear stage capable of a positioning accuracy in the order of 10 micron. Besides 3D printed parts it only uses 2mm metallic rods, a 40mm spring and a 55mm M3 bolt with nut and washer. The complete fabrication process is described in an instructable: https://www.instructables.com/Build-a-3D-Printed-Linear-Stage/
I also designed other linear stages and a micromanipulator compatible with this model, all the files and building instructions are available here:
Linear stages:
https://www.instructables.com/Build-a-3D-Printed-Linear-Stage/
https://makerworld.com/en/models/485262
https://makerworld.com/en/models/485267
Rotational stages (in plane):
https://www.instructables.com/Build-a-3D-Printed-Rotational-Platform/
https://makerworld.com/en/models/496230
Out-of-plane rotation (goniometric) stage:
https://www.instructables.com/Build-a-3D-Printed-Goniometric-Stage-tilt-Correcti/
https://makerworld.com/en/models/497665
Micromanipulator:
https://www.instructables.com/Build-a-3D-Printed-Micro-manipulator/
https://makerworld.com/en/models/478650
(those are the makerworld links since the point help me to get printing consumables but you can find thingiverse links on my profile if you prefer...)
| Knob.STL | 438.9KB | |
| XYZ_cutting_guide.STL | 528.5KB | |
| Z_stage_base.STL | 214.3KB | |
| Z_stage_middle.STL | 30.9KB | |
| Z_stage_table.STL | 352.0KB |
