Original Prusa I3 MK3 ENCLOSURE -Ikea Lack Table – Prusa Research 3D Printer Model
The file 'Original Prusa I3 MK3 ENCLOSURE -Ikea Lack Table – Prusa Research 3D Printer Model' is (stl,stp,dxf) file type, size is 4.8MB.
The file 'Original Prusa I3 MK3 ENCLOSURE -Ikea Lack Table – Prusa Research 3D Printer Model' is (stl,stp,dxf) file type, size is 4.8MB.
See the official video:
https://youtu.be/oS7ZtBNh2hE
Follow the Mikolas Zuza's tutorial article on:
https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/
Plexiglass dimensions:
3pcs: 440 x 440 mm, thickness 3mm
2pcs: 220 x 440 mm, thickness 3mm
NOTE:
Adjustable spool holder STL file may not be adjustable due to the pieces melting together. • Check the gcode preview after slicing and make sure, there is a gap between the two pieces.
• Otherwise, slice with a different layer height.
• Or split the model into objects and print pieces separately.
Alternatively, check the REMIXes section and find an already modified file: https://www.thingiverse.com/thing:2864118/remixes
p.e.
https://www.thingiverse.com/thing:3035871
https://www.thingiverse.com/thing:2990450
https://www.thingiverse.com/thing:2878385
https://www.thingiverse.com/thing:3556050
https://www.thingiverse.com/thing:4180194
Good luck!
➜ Check out the newest creative project:
http://www.paragami.com
TEMPLATES for 3D HANDMADE PAPER WALL ART
http://www.dominikcisar.cz
http://www.model3D.cz
...........................
People were asking, where they can buy the plexiglass. And this guy asked me if I could mention his family company here. There is always time to do a good deed. SO here you go: http://qcpinc.net/.
PS: I do not know about this company. If you will a have good experience with them, tell me;)
| Prusa_Enclosure_Bottom_Corners.stl | 1.0MB | |
| Prusa_Enclosure_Bottom_Corners.stp | 880.0KB | |
| Prusa_Enclosure_Cable_clip.dxf | 6.7MB | |
| Prusa_Enclosure_Cable_clip.stl | 918.1KB | |
| Prusa_Enclosure_Cable_clip.stp | 594.7KB | |
| Prusa_Enclosure_Door_Knob.dxf | 870.9KB | |
| Prusa_Enclosure_Door_Knob.stl | 108.3KB | |
| Prusa_Enclosure_Door_Knob.stp | 194.7KB | |
| Prusa_Enclosure_PSU_Holder.dxf | 1.4MB | |
| Prusa_Enclosure_PSU_Holder.stl | 201.2KB | |
| Prusa_Enclosure_PSU_Holder.stp | 136.6KB | |
| Prusa_Enclosure_Spool_Holder.dxf | 938.4KB | |
| Prusa_Enclosure_Spool_Holder.stl | 2.2MB | |
| Prusa_Enclosure_Spool_Holder.stp | 902.9KB | |
| Prusa_Enclosure_Spool_Holder_Adjustable.stl | 2.2MB | |
| Prusa_Enclosure_Spool_Holder_Adjustable_3wheels.stl | 4.8MB | |
| Prusa_Enclosure_Spool_Holder_Adjustable_main.stl | 134.2KB | |
| Prusa_Enclosure_Spool_Holder_Adjustable_slildr.stl | 54.9KB | |
| Prusa_Enclosure_Top_Corners.dxf | 4.1MB | |
| Prusa_Enclosure_Top_Corners.stl | 655.0KB | |
| Prusa_Enclosure_Top_Corners.stp | 676.7KB |
