The file 'Original Hot End Fix Creality, Creality NEO, Tevo Tornado, Tronxy, JG Aurora, Eryone ThInker, MP Mini, Sovol S4 3D Printer Model' is (stl,f3d,pdf) file type, size is 10.6MB.
This mod// fix adds a spacer inside the top of hot end that allows a cut length of tubing to be lightly compressed against the nozzle. also taking the extra work of maintaining that seal away from the teeth in the bowden coupler.
See the post processing section for step by step instructions on putting the parts together.
There are verions currently for the following model hot ends, Ender-3, Ender-3 pro Ender-5 all use the standard ender .stl), CR10, cr10 V@ and V3 (CR10S Pro/Max at bottom of page). Tevo Tornado, Tronxy X5SA
I have added an .pdf that has the tools to calibrate your printer to adjust for your now improved flow rate.
If you need new tubing and couplers use this discounted link below
https://www.th3dstudio.com/product/essential-creality-ptfe-upgrade-pack/
added larger diameter hole for the pc4 m10 size spacer for easier filament withdrawal. fits any machine with the pc4 M10 fillling, ender 3 , ender5, ender 5 plus, tornado and others
5/11/2020
added ,1mm length to all the standard type cut guages, due to many users getting under length cut without measuring the results. should not impact users significantly.
also added two more robust/thicker cut guages for those who want it more rigid in .4 and .6 blade width
5/15/2020
Added CR10S PRO V2 to the family. it has a throat that is apprx 3mm shorter than the original cr10s pro. So to prevent issues it warrants its own set of guide and spacer.
6/6/2020 added ERYONE THINKER SE using user provided length target
8/18/2020 added CR6 SE
2/24/2021 renamed the cr10v2DD to the cr10 V3DD to be in alignment with printer name {i received the DD as an add on to the V2 at beta testing}
08-27-2021 Sovol S4 captured ptfe target 22.8 +-.2mm
08-28-2021 Added Monoprice mini tubing cutter for captured ptfe length target 26.3mm -.2 +0. tolerance
04-28-2022 Added Ender 3 max cut and spacer 31.2 to 31.6mm
09-10-2022 Added NEO and CR10 Smart series parts in 2 lengths as the E3 Max Neo was ! mm shorter than the E3v2 Neo
04/18/2024 ADDED SPRITE CAPTURED PTFE CUTTER 19.3MM TARGETLENGTH 19.2 TO 19.6 TOLERENCE
04/18/2024 E3V3SE CAPTURED PTFE 18.5 TARGET 18.3 TO 18.7 TOLERENCE
| 5.8_special.stl | 162.7KB | |
| 6.8_special.stl | 165.8KB | |
| 6mm_special.stl | 162.4KB | |
| cr10spro-max_spacer.stl | 134.2KB | |
| CR10SPROV2.stl | 110.5KB | |
| CR10SPRO_fixed_ptfe47.7_v17.f3d | 9.4MB | |
| CR10S_PROV_V2_CUT.stl | 205.5KB | |
| CR10_newer.stl | 161.4KB | |
| Cr10_newer_spacer.stl | 106.6KB | |
| CR10_Smart_cut.stl | 52.6KB | |
| CR10_Smart_spacer.stl | 106.6KB | |
| cr10_s_pro-max_cut.stl | 327.7KB | |
| CR10_V2.stl | 131.6KB | |
| CR10_V2_spacer.stl | 106.6KB | |
| cr10_V3_DD.stl | 40.9KB | |
| CR20_cut.stl | 121.9KB | |
| Cr20_spacer.stl | 106.6KB | |
| CR6_SE_CUT.stl | 162.3KB | |
| CR6_SE_SPACER.stl | 106.6KB | |
| cr_10_older.stl | 182.7KB | |
| E3V3SE.stl | 63.4KB | |
| ENDER_3_MAXCUT.stl | 206.9KB | |
| ENDER_3_MAX_SPACER.stl | 106.6KB | |
| Ender_3_pro_spacer.stl | 106.6KB | |
| Ender_3_spacer.stl | 106.6KB | |
| Ender_3_V2.stl | 179.2KB | |
| Ender_3_v2_spacer.stl | 106.6KB | |
| ender_3__cut.stl | 224.4KB | |
| ender_3__Pro_cut.stl | 224.4KB | |
| Ender_5_all.stl | 153.1KB | |
| Ender_5_spacer.stl | 106.6KB | |
| eryone_thinker_se_35.75.stl | 127.0KB | |
| E_step_setting_and_Flow_rate_tuning.pdf | 101.3KB | |
| JG_Aurora_A1_A3S_A5_A5S.stl | 96.3KB | |
| large_id_pc4_m10.stl | 107.8KB | |
| MONOPRICE_MINI.stl | 209.0KB | |
| NEO_hot_end_36.3.stl | 52.6KB | |
| NEO_hot_end_37.3.stl | 52.2KB | |
| NEO_Spacer.stl | 106.6KB | |
| Sovol_s4_23mm.stl | 145.3KB | |
| SPRITE.stl | 65.3KB | |
| Tevo_Tornado_cut.stl | 144.1KB | |
| Tevo_tornado_spacer.stl | 106.6KB | |
| thick_31.4_.4mm.stl | 179.2KB | |
| thick_31.4_.6mm.stl | 206.9KB | |
| Thinker_S._spacer.stl | 106.6KB | |
| TronxyX5SA.stl | 160.3KB | |
| Tronxy_X5SA_spacer.stl | 106.6KB |
