Orifice For Spinning Wheel 3D Printer Model
The file 'Orifice For Spinning Wheel 3D Printer Model' is (stl) file type, size is 103.3KB.
The file 'Orifice For Spinning Wheel 3D Printer Model' is (stl) file type, size is 103.3KB.
UPDATE 2/10/17: A new STL is available! I finally got around to designing the hole into the "orifice" part. I have not test printed this yet, but I imagine that it will still need some light heat work to smooth out the inside of the hole (to avoid catching wool fibers).
This is my design for a spinning wheel orifice. It is not drilled but has an indicator center mark. I recommend pilot drilling at 10 degrees from vertical, then final drilling with a 5/16" bit. Heat polish to keep the wool fibers from catching on the inside of the orifice.
There is a hole made for the spindle axle. The axle will need to be epoxied into place.
Check my other files to see my 'maiden' STL file. This orifice rides inside of that maiden.
http://www.thingiverse.com/thing:1499648/#files
| TRB_Orifice_for_mother-of-all_4-14-16.stl | 759.8KB | |
| TRB_Orifice_Reboot_STL_2-10-17.stl | 205.8KB |
