A small decorative fountain.
I designed it as a drinking fountain for our cat but it works just as well just for aesthetics.
The pump used is an Aquael PFN350 with the filter removed, but any pump which fits into a space of L90xW45xD47mm will do (D68mm at the highest point of the spout). The tube should be of 8mm outer diameter.
Use the assembled stl to find out which part goes where at what angle. Use standard glue to assemble the construction. There's no need to glue on the top part.
| 2nd.stl | 826.5KB | |
| 3rd.stl | 787.6KB | |
| 4th.stl | 787.6KB | |
| 5th.stl | 846.6KB | |
| assembled.stl | 5.5MB | |
| base.stl | 751.9KB | |
| connectors1-3_v1.stl | 715.1KB | |
| pumpConnector.stl | 95.9KB | |
| top.stl | 1.5MB |
