The file 'Orca Assault Craft 3D Printer Model' is (stl,f3d,blend) file type, size is 9.0MB.
This is a 1:32 scale model kit of the GDI Orca from the very first Command & Conquer Game from 1995.
The kit is split into simple components which makes it easier to remove the layer lines, just coat the individual parts with spraycan filler and sand it down until all visible lines are gone.
I recommend to use a small layer height (0.08mm or 0.12mm), the canopy should be printed in Vase-Mode.
The gun barrels are Gr.1 / 20G hypodermic needles, apply heat to remove the plastic shroud and don't stab yourself even the blunt end can hurt a lot.
Drill a 6mm hole at the center of mass for a magnet if you want to use the magnetic display stand: https://www.thingiverse.com/thing:2830414
This is my first (and probably last) Blender project, originally i had planned to include a fully modeled interior with pilot and vacuumformed canopy with 3D printed frame but i never found the time or motivation to add all those extra details... sorry :-(
The Blender and Fusion360(weapons) files are included.
| canopy_solid.stl | 1.5MB | |
| fuselage1.stl | 2.7MB | |
| fuselage2.stl | 2.9MB | |
| fuselage3.stl | 3.0MB | |
| fuselage_complete.stl | 8.3MB | |
| gatling_body.stl | 291.1KB | |
| gatling_disk.stl | 70.8KB | |
| gatling_turret.stl | 116.7KB | |
| Gatling_v3.f3d | 189.5KB | |
| horizontal_stabilizer.stl | 337.6KB | |
| horizontal_stabilizer_mirrored.stl | 337.6KB | |
| hydra_pylon.stl | 9.5KB | |
| hydra_rocket_pod.stl | 390.8KB | |
| hydra_v5.f3d | 212.9KB | |
| Orca50.blend | 2.2MB | |
| radar.stl | 1000.1KB | |
| rear_turbine.stl | 28.1KB | |
| sensor_pod.stl | 2.0MB | |
| sidebay.stl | 1.0MB | |
| sidebay_mirrored.stl | 1.0MB | |
| turbine1.stl | 1.8MB | |
| turbine2.stl | 28.1KB | |
| turbine3.stl | 800.1KB | |
| turbine_pylon.stl | 1.7MB | |
| vertical_stabilizer.stl | 8.5KB |
