Orange Pi Zero Slim Case Pro 3D Printer Model
The file 'Orange Pi Zero Slim Case Pro 3D Printer Model' is (STL) file type, size is 1.3MB.
The file 'Orange Pi Zero Slim Case Pro 3D Printer Model' is (STL) file type, size is 1.3MB.
This is a compact and slim case for the Orange Pi Zero.
It has a swivel WiFi antenna that folds to the side whenever needed for storage and transportation.
It'll even fit inside the box that the OPi Lite came in!
It's a passively cooled case with access to GPIO pins by removing the plastic protection.
It's build for low/med performance, running constantly at 100% load may not be a good idea due to being passively cooled. Should not be worse than running the card naked though.
[Mechanical parts needed]
4 pcs M3x12 insex screws
4 pcs M3 nuts
[Electronic parts needed]
Orange Pi Zero
Orange Pi Heatsinks
RP-SMA Antenna Adapter
2.4Ghz Antenna
[DONATIONS]
If you find that the item improve your daily life, consider supporting the designer by sending a tip.
Click "TIP DESIGNER" here.
| OPi_Zero_Case_1_Bottom_1-2.STL | 2.0MB | |
| OPi_Zero_Case_1_Top_1-2.STL | 1.6MB |
