Oral-B IO Series 9 Stand 3D Printer Model
The file 'Oral-B IO Series 9 Stand 3D Printer Model' is (3mf,stl,f3d,step) file type, size is 9.6MB.
The file 'Oral-B IO Series 9 Stand 3D Printer Model' is (3mf,stl,f3d,step) file type, size is 9.6MB.
Oral-B iO Series 9 toothbrush holder with 2 or 4 brushes
You can choose between a cable management to the right or left side and create your own name tags with the included step/ f3d file.
I also uploaded the stands without the name tags. Feel free to choose! :-)
I recommend to increase the infill pattern shortly before the brush holders begin to appear. I started at 20.6mm with 50% infill to strengthen the holders (for the stand itself is 10% more than enough).
Dimensions:
Stand for 2 brushes: 150 x 65.5 x 44mm (LxWxH)
Stand for 4 brushes: 170x75.5x44mm (LxWxH)
UPDATE 03.06.21: Added stand for 4 brushes!
UPDATE 04.06.21: small improvement on the stands
UPDATE 30.03.22: Added stand for 2 OralB iO and 4 brushes (200x75,5mm)
| 2xOralB_4xBrushes_cablecover_left_rightcable.3mf | 96.9KB | |
| 2xOralB_4xBrushes_cablecover_left_rightcable.stl | 320.4KB | |
| 2xOralB_4xBrushes_cablecover_right_rightcable.3mf | 106.2KB | |
| 2xOralB_4xBrushes_cablecover_right_rightcable.stl | 355.1KB | |
| 2xOralB_4xBrushes_stand_rightcable.3mf | 679.1KB | |
| 2xOralB_4xBrushes_stand_rightcable.stl | 2.1MB | |
| cablecover_left.stl | 308.7KB | |
| cablecover_left_x4.stl | 275.7KB | |
| cablecover_right.stl | 308.6KB | |
| cablecover_right_x4.stl | 275.7KB | |
| clearplate.stl | 684.0B | |
| OralB_Nameplate.f3d | 84.1KB | |
| OralB_Nameplate.step | 89.1KB | |
| stand_2devices_1charger.stl | 2.6MB | |
| stand_leftcable.stl | 1.8MB | |
| stand_leftcable_withoutNames.stl | 1.8MB | |
| stand_rightcable.stl | 1.8MB | |
| stand_rightcable_withoutNames.stl | 1.8MB | |
| stand_x4_leftcable.stl | 2.3MB | |
| stand_x4_leftcable_withoutNames.stl | 2.3MB | |
| stand_x4_rightcable.stl | 2.3MB | |
| stand_x4_rightcable_withoutNames.stl | 2.3MB |