OpenZ 1:28eme V1.0 3D Printer Model
The file 'OpenZ 1:28eme V1.0 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'OpenZ 1:28eme V1.0 3D Printer Model' is (stl) file type, size is 1.3MB.
Mise a jour du 08/03/2020
en fourniture j'utilise:
pour la partie électronique :
| 10_platine_sup_V2.1.stl | 388.9KB | |
| 11_support_recepteur.stl | 35.4KB | |
| 12_support_ESC_MiniZ_V2.0.stl | 33.7KB | |
| 13_support_switch.stl | 4.2KB | |
| 14_support_servo_V2.1.stl | 304.4KB | |
| 15_platine_avant_V2.2.stl | 326.4KB | |
| 16_barre_direction.stl | 105.0KB | |
| 17_butee_axe_train_avant.stl | 84.5KB | |
| 18_chappe.stl | 156.9KB | |
| 19fusee_V3.0.stl | 368.0KB | |
| 1_train_arriere.stl | 250.7KB | |
| 20_jante_arriere_2.stl | 580.4KB | |
| 21_jante_avant_2.stl | 607.7KB | |
| 22_corp_amortisseur_2.stl | 236.5KB | |
| 23_tige_amortisseur.stl | 109.8KB | |
| 2_pivot.stl | 29.8KB | |
| 3_support_amortisseur.stl | 63.9KB | |
| 4_support_moteur_1.stl | 230.6KB | |
| 5_support_moteur_2.stl | 168.1KB | |
| 6_Axe_carrée_roues_serrage__V2.stl | 178.1KB | |
| 7_Axe_carrée_roues_V2.stl | 58.9KB | |
| 8_gears.stl | 227.4KB | |
| 9_chassis_V2.1.stl | 413.6KB |
