Opentrons OT-2 Sarstedt Pipette Tip Box Adapter 3D Printer Model
The file 'Opentrons OT-2 Sarstedt Pipette Tip Box Adapter 3D Printer Model' is (stl) file type, size is 20.0KB.
The file 'Opentrons OT-2 Sarstedt Pipette Tip Box Adapter 3D Printer Model' is (stl) file type, size is 20.0KB.
Hi OT-2 users,
This adapter will allow you to use (the new) Sarstedt Pipette tip boxes with your OT-2. Mind you that these are the boxes with hinges and four little holes in the bottom, which is where this adapter connects very tightly. So be careful removing the adapter.
Depending on you printer settings either the loose or tight version will fit better on your deck. For us, the tight version, which is very tight works best, and prevents the 8-channel pipette from accidentally picking up the whole box - which is a total mess!
E.g. for product number: 70.3030.200
Here is a picture: https://shop.dalsup.com/images/gallery/1578/634X500/Sarstedt_Box_Yellow_1.jpg - I don't have any affiliations with this shop, it's just what google spit up.
Cave: We found that these tips will not be picked up at the same level, as the rack is slightly flexible. So if you need sub-0.5mm accuracy for tip length/bottom clearance, better go with another brand.
| Sarstedt_Pipette_tip_box_adapter_loose.stl | 56.2KB | |
| Sarstedt_Pipette_tip_box_adapter_tight.stl | 56.5KB |
