Opentrons OT-2 Microplate Stand 90 Degrees Narrow 3D Printer Model
The file 'Opentrons OT-2 Microplate Stand 90 Degrees Narrow 3D Printer Model' is (stl) file type, size is 31.1KB.
The file 'Opentrons OT-2 Microplate Stand 90 Degrees Narrow 3D Printer Model' is (stl) file type, size is 31.1KB.
Hello OT-2 Users,
this gadget will allow you to place an MTP turned by 90deg on the deck. Of course, you will need the slot above to be free.
This will put A8 well into A1 position and you can thus use 8x8wells of this plate.
We're using it to make serial dilutions in a 2ml deepwell plate using the 8-channel 300ml pipette. When serial dilution is finished we turn the deepwell plate again to regular position and now can treat cells with vertical 8-point limiting dilutions.
I hope this is as helpful to others as it was to us.
| 96_well_microplate_90deg_stand-NEW.stl | 101.8KB |
