Here's a nice set of track markers for all of you who want's to build your own r/c race track, we used them at 3d Meetup here in Sweden and they have also been tested and approved by the Swedish r/c drifters of Sidewayshabo.
I made these in cooperation with 3d Prima who sponsored the race track we had at 3d Meetup 2018
My idea was to bring a cheaper and more customizable version of rc race track markers than what's available to buy. The ones you buy cost about about 10$ per 100mm section, these cost whatever you pay for your plastic and you can get them in any length (25-200mm sections) and color you want. Another benefit with these which I learned from people with experience from the markers you buy is that if you brake a clip on the bought ones you may as well throw them away but for these you just print another clip, or if you brake another section just replace that.
There are for now parts to make most track shape you might want but I will upload more curve radiuses further on and also a few other things but these parts should get you all started building your own tracks.
If you have any questions please let me know and if you like these and want to help me design more things these as many other Thingiverse things are beer fueled, just saying ;)
| 100mm_curb_midpiece.stl | 309.3KB | |
| 100mm_straight.stl | 96.3KB | |
| 200mm_curb_midpiece.stl | 345.4KB | |
| 200mm_straight.stl | 104.5KB | |
| 200mm_straight_Open_RC.stl | 1.0MB | |
| 25mm_straight.stl | 309.2KB | |
| 50mm_curb_midpiece.stl | 280.1KB | |
| 50mm_straight.stl | 110.3KB | |
| 75mm_curb_midpiece.stl | 283.2KB | |
| 75mm_straight.stl | 116.5KB | |
| Barrier.stl | 140.2KB | |
| cone.stl | 1.1MB | |
| Curb_clip.stl | 259.1KB | |
| Hairpin_quarter.stl | 135.6KB | |
| Inside_curve_225r_50d.stl | 323.0KB | |
| Inside_curve_45r_50d.stl | 119.0KB | |
| Inside_curve_90r_50d.stl | 162.0KB | |
| Outside_curve_225d_50r.stl | 304.3KB | |
| Outside_curve_45d_50r.stl | 207.5KB | |
| Outside_curve_90d_50r.stl | 86.1KB |
