The file 'OpenRC Go-Kart V0.9.2 3D Printer Model' is (stl) file type, size is 192.1MB.
!!! WIP !!!
The Latest files can be found here:
https://www.prusaprinters.org/de/prints/56062-openrc-gokart
This is an OpenRC Project for a Go-Kart
As Some friends and I decided to create an extra class for hobby driver with self printed RC cars ... we started this project. We will try to reuse as much as possible from other projects so that it can be reused even here. (Less engineering and of course a higher reuse of components and knowledge)
As I'm addicted to coffe ;)
PartList:
Screws:
4 x M3x16 lenshead
4 x M3x10 lenshead
10 x M3x12 countersunk
13 x M3x10 countersunk
30 x M3x8 countersunk
Nuts
14 x M3
Bearings:
4 x 12x18x4 (Rear Achsle and Steeringrod)
4 x 8x12x3,5 (Wheels Front)
There will be also a driver in the nearer future which should be able to steer and move the head to where it drives.
Feel free to comment ... as already said ... this is currently under construction.
This design was published to be used and printed free of charge and not to be distributed or sold for profit. (My contribution to RC Hobbyists to try and keep it as affordable as possible)
Update:2018-05-27 I added the steering wheel and Chassis with Seat.
Update:2019-04-25 I added the Steering Axle as I tested that it works fine
Update:2019-04-09 I'm currently working on the steering as it should move the steering wheel for later on having a race driver in there
Update:2019-07-26 I'm currently working on the Side and Front of the Kart (see new Pictures)
Update:2019-07-29 Version 0.7 is out ... I will upload the Step Files to a fileshare for personal reworking:
Update:2019-09-04 Version 0.8 is out. There are some morifications on the back and front ... You will find a Version on the Models from now on.
Update:2019-10-15 Version 0.8.3 is out with the rear end
Update:2019-10-18 Version 0.8.5 is out with some modifications for better printing (And Inluding a first one piece Chassis for larger printers)
Update:2020-04-06 Version 0.8.7 Optional FrontSteering for Tamiya F104
Update:2020-06-04 Version 0.9 New Rear axis for better performance with beltdrive
Please use herefor a GT2 Belt with 6mm and 166mm (83Teeth) and a GT2Pulley with 16 Teeth and an innerdiameter of 3.17mm
And use an aluminium Rod 8mm by 1mm
Update:2020-06-06 Version 0.9.2 The Engin from Dirk Wackenhut is now part of the CORE
You can fin his geniues designs in the Remixes!
Current Version can be downloaded as Step from:
https://grabcad.com/library/openrc-go-kart-v0-7-1
I created a FaceBook Group for discussions:
https://www.facebook.com/groups/2107716216197400/
I will post here the final Parts I took from the original F1 Car from here:
https://www.thingiverse.com/thing:1193309
And the Pinion I took from here
https://www.thingiverse.com/thing:2764094
Assemble Instruction "not official" are here:
https://www.printables.com/de/model/56062-openrc-gokart
9T_Pinion.stl | 128.6KB | |
Endtopf.stl | 9.5MB | |
Front_Axle_v5_1.stl | 485.3KB | |
Grundkörper_2.stl | 138.6MB | |
Halter.stl | 861.4KB | |
OpenRC-GoKart-11mmBlock.stl | 15.9KB | |
OpenRC-GoKart-Achse-Lager-v0.9.stl | 630.0KB | |
OpenRC-GoKart-Coupling-Servo.stl | 304.4KB | |
OpenRC-GoKart-Coupling-Steering.stl | 50.3KB | |
OpenRC-GoKart-FrontWheelHub.stl | 636.2KB | |
OpenRC-GoKart-Front_Lower_BOM_Left_v085.stl | 207.6KB | |
OpenRc-GoKart-Front_Lower_BOM_Left_V087.stl | 489.2KB | |
OpenRC-GoKart-Front_Lower_BOM_Right_v085.stl | 208.0KB | |
OpenRC-GoKart-Front_Lower_BOM_Right_v087.stl | 485.9KB | |
OpenRC-GoKart-Front_Lower_Left.stl | 23.9KB | |
OpenRC-GoKart-Front_Lower_RightM.stl | 23.8KB | |
OpenRC-GoKart-Front_Upper_BOM_Left_V087.stl | 580.0KB | |
OpenRC-GoKart-Front_Upper_BOM_Right_V087.stl | 576.9KB | |
OpenRC-GoKart-Front_Upper_Left.stl | 32.7KB | |
OpenRC-GoKart-Front_Upper_Right.stl | 32.6KB | |
OpenRC-GoKart-GT2-1.stl | 4.2MB | |
OpenRC-GoKart-GT2-2.stl | 5.4MB | |
OpenRC-GoKart-KaroHalter_Front_V08.stl | 282.9KB | |
OpenRC-GoKart-KaroHalter_Rear_Left_V08.stl | 444.5KB | |
OpenRC-GoKart-KaroHalter_Rear_Right_V08.stl | 404.8KB | |
OpenRC-GoKart-KaroHinten_1.stl | 4.6MB | |
OpenRC-GoKart-KaroHinten_2.stl | 4.6MB | |
OpenRC-GoKart-KaroVorne_2.stl | 41.9KB | |
OpenRC-GoKArt-KaroVorne_v086.stl | 3.4MB | |
OpenRC-GoKart-Karo_V08.stl | 5.2MB | |
OpenRC-GoKart-RearWheelAdapter_v0.9.stl | 445.7KB | |
OpenRC-GoKart-Rear_Axle.stl | 40.5KB | |
OpenRC-GoKart-Rear_Axle_Middle_v083.stl | 365.2KB | |
OpenRC-GoKart-Rear_Axle_v0.9.stl | 749.5KB | |
OpenRC-GoKart-Rear_Axle_v086.stl | 261.4KB | |
OpenRC-GoKart-ServoMount.stl | 173.5KB | |
OpenRC-GoKart-Steering_Axle.stl | 193.5KB | |
OpenRC-GoKart-Steering_Mount.stl | 162.0KB | |
OpenRC-GoKart-Steering_Mount_Steering_Side.stl | 210.6KB | |
OpenRC-GoKart-Steering_Wheel.stl | 282.5KB | |
OpenRC-GoKart_Adapter_StandardWheels_v082.stl | 27.0KB | |
OpenRC-GoKart_Adapter_StandardWheels_v083.stl | 453.2KB | |
OpenRC-GoKart_Chassis_Batery_Holder_V08.stl | 271.2KB | |
OpenRC-GoKart_Chassis_Front_V085.stl | 1.3MB | |
OpenRC-GoKart_Chassis_ONEPIECE_085.stl | 2.1MB | |
OpenRC-GoKart_Chassis_Rear_V08.stl | 688.3KB | |
OpenRC-GoKart_Chassis_Right.stl | 131.1KB | |
OpenRC-GoKart_Chassis_Seat.stl | 4.5MB | |
OpenRC-GoKart_Krümmer_v4.stl | 15.0MB | |
OpenRC_GoKart_Front_Block_V085.stl | 316.7KB | |
OpenRC_GoKart_Steering_Support_Left_V08.stl | 167.0KB | |
OpenRC_GoKart_Steering_Support_Right_V08.stl | 167.0KB | |
OpenRC_Motor_Abstandsplatte.stl | 511.0KB | |
Rear_Axle_Holder_Left_v0.9.stl | 893.1KB | |
Rear_Axle_Holder_Left_v08.stl | 469.8KB | |
Rear_Axle_Holder_Right_v0.9.stl | 932.5KB | |
Rear_Axle_Holder_Right_v08.stl | 480.6KB | |
Rear_Axle_Holder_Right_v38.stl | 883.9KB | |
Vergaser.stl | 119.4MB | |
Wheel_Lock_Nut_v6.stl | 289.9KB | |
Zylinder.stl | 52.0MB | |
Zylinderkopf_mit_Lüftung.stl | 11.1MB | |
Zündkerze.stl | 9.4MB | |
Zündkerzenstecker.stl | 24.0MB |