OpenRc F1 LAE 3D Printer Model

License: CC BY
File formats: stl,STL
Download type: zip
Size:12.7MB

The file 'OpenRc F1 LAE 3D Printer Model' is (stl,STL) file type, size is 12.7MB.

Summary

OpenRc F1 Linden Aero Edition

This is a collection of all of the parts made by various people into one single list.
includes updated axle with no holes and a differential drive adapter for the wide axle.
the front hub/axles two bolts, one that comes in from the inside out to act as a standard axle with threads for a nut on the outside, and one from the top down for steering. there is the original servo saver and an expert mode steering arm. this means the steering is tightened up and more responsive, but if you crash you may destroy your servo. I also highly recommend that you use a MOD1 pinion gear with a shaft adapter.

UPDATE 1/5/19: Added lid 3

Build guide: http://danielnoree.com/the-openrc-f1-build-guide/

Questions & Answers: http://danielnoree.com/openrc-questions/
OpenRC Electronics: http://danielnoree.com/openrc-electronics/

Complete hardware/electronics lists and kits available here: http://danielnoree.com/openrc-electronics/

Please respect the license under which this project is released. Thank you!

axle.stl 118.7KB
Barge_Board_Left_OpenRC_F1_2017.stl 34.4KB
Barge_Board_Right_OpenRC_F1_2017.stl 34.4KB
Diff01.STL 1.6MB
diff_drive.stl 1.4MB
EXPERT_MODE_steer_arm.stl 188.1KB
Faxle.stl 1.1MB
front.stl 3.7MB
Front_BOM_Block.stl 39.5KB
Front_Chassie_OpenRC_F1_2017.stl 360.3KB
Front_Lower_BOM_OpenRC_F1_2017.stl 57.5KB
Front_Rim_For_F104_Tire.stl 309.4KB
Front_Upper_BOM_OpenRC_F1_2017.stl 521.4KB
Front_Wing_OpenRC_F1_2017_1.stl 1.1MB
lid.stl 4.5MB
lid_3.stl 5.1MB
lock_pin.stl 64.8KB
Main_Turning_Vane_Left.stl 119.2KB
Main_Turning_Vane_Right.stl 119.3KB
motor_cover.stl 3.3MB
Nose.stl 587.2KB
Pinion_Gear.stl 93.8KB
Rainlight_and_Diffuser.stl 781.7KB
Rear_Chassie_OpenRC_F1_2017-F104.stl 536.2KB
Rear_Rim_For_F104_Tire.stl 587.0KB
Rear_View_Mirror_Left.stl 817.8KB
Rear_View_Mirror_Right.stl 817.8KB
Rear_Wing_OpenRC_F1_2017_1.stl 312.7KB
Servo_Holder.stl 241.2KB
Servo_Saver_Lower.stl 311.1KB
Servo_Saver_Upper.stl 289.0KB
Sharkfin_OpenRC_F1_2017.stl 25.2KB
side.stl 2.5MB
Spur_Gear.stl 246.8KB
Steering_Push_Pin_OpenRC_F1_2017.stl 20.6KB
Wheel_Axle_Holder_Left.stl 516.5KB
Wheel_Axle_Holder_Right.stl 259.5KB
Wheel_Lock_Nut.stl 65.5KB