PLEASE ROTATE 90 Deg. on the X axis before printing. Sorry I didn't adjust that yet.
Purchased the springs and the aluminium rods from my local Lowes. For a set of 2 shocks you need 1 rod(they come in a 3 pack) cut it into 2 parts [i will replace this text with the length of the cut rods]. The wishbone arm connection side will be very tight and hold the rod firm. Use force to get it to hit the bottom of it's opening. The top has a series of slots inside for the lubricant that you may decide to use. Fill it before you place the rod into the top. Any questions, feel free to ask
| OilContainerAndTop_v1.3.2.STL | 347.2KB | |
| ShockAssembly_v1.3.SLDASM | 430.0KB | |
| Spacer_v1.3.0.STL | 9.7KB | |
| WishboneConnection_v1.3.0.STL | 187.6KB |
