OpenIPC Radxa Zero 3W HDMI Ground Station 3D Printer Model
The file 'OpenIPC Radxa Zero 3W HDMI Ground Station 3D Printer Model' is (step,stl) file type, size is 935.9KB.
The file 'OpenIPC Radxa Zero 3W HDMI Ground Station 3D Printer Model' is (step,stl) file type, size is 935.9KB.
This is a compact OpenIPC FPV video receiver based on Radxa Zero 3W and "Archer" RTL8812AU WiFi module.
Self-locking (no screws needed to close it).
WiFi module USB connector is hidden inside the box (no dangling wires), but requires modified (5.1k resistor) "MX-12" 90° USB-C connector.
Radxa and cooler are screwed with M2 bolts (5mm for Radxa).
WiFi module and BEC glued with hot glue.
In my case DC barrel plug was also glued, but depends on your model.
| GS_Case-Back.step | 951.0KB | |
| GS_Case-Back.stl | 2.5MB | |
| GS_Case-Top.step | 317.1KB | |
| GS_Case-Top.stl | 376.8KB |
![[FPV] Happymodel Crux3 Mods 3D Printer Model](https://cdn.3axis.co/assets/1d/6c/fc/60/1d6cfc60-f687-4408-b1c9-1c13d87a6169/images/14b2cc53-3d1d-48e6-80c1-da68e2cff990_thumb.jpg)
