A case redesign for the Open Theremin v3 with an ornate filigree finish and open slots to allow for fitting with antennas installed. Glue the back panel on. The ports panel and front face should press fit, some sanding may be required. I have included the step files. No Supports needed.
The link for the knobs: https://www.thingiverse.com/thing:2227856
The Open Theremin v3 is a great, cheap, and easy project for those who want to try out a theremin. Requires an arduino uno and a soldering iron, both can be bought for very cheap. The open thermin needs an external speaker and power source. If you'd like to check it out, here is the site: http://www.gaudi.ch/OpenTheremin/index.php
Here is an overview of construction: https://www.youtube.com/watch?v=8bxz01kN7Sw
| button.stl | 24.9KB | |
| Theremin_Back_v2.stl | 168.5KB | |
| Theremin_Body_v2.stl | 7.9MB | |
| Theremin_Lid_v2.stl | 5.1MB | |
| Theremin_Ports.stl | 11.0KB |
