The file 'Open Rowing Monitor Performance Monitor CASE For NOHRD WaterRower Classic Rowing Machine 3D Printer Model' is (stl,step) file type, size is 171.6KB.
All files "v2_..." are needed for optimized version 2:
This is a all-in-one case for mounting an Raspberry Pi PCB including an 4.3inch Touchscreen Display to an NOHRD WaterRower Classic damage-free!
Also available for download here: A single sensor case with cable outlet if you do not want to use a display.
What you need:
Please configure Raspberry Pi according to the instructions for Open Rowing Monitor:
--> https://laberning.github.io/openrowingmonitor/ <--
Hardware:
This Youtube Videos shows my solution for mounting 4 magnets around a rotating disc that is firmly connected to the impeller on an axle. A reed sensor is positioned near to the magnets.
--> https://youtu.be/Xwc5NzPmvLA <--
The clamp is glued to the wood of the rowing machine using high-quality double-sided adhesive tape. It holds well and can be removed without leaving any residue if necessary.
I used some hot glue to mount the "connecting plate" to the sensor case for better holding.
The easiest way to power the Raspberry is via GPIO. If you want to use a USB-C connection, you will need a right-angle plug. I sanded my angled connector flat with sandpaper until it fitted into the housing.
| Case.stl | 38.4KB | |
| Casedeckel.stl | 13.4KB | |
| Klebecase.stl | 65.2KB | |
| Rohr.stl | 24.3KB | |
| Single_Sensorklemme.stl | 49.7KB | |
| Single_Sensorklemme_Deckel.stl | 25.5KB | |
| v2_adapter_plate.step | 27.4KB | |
| v2_adapter_plate.stl | 40.7KB | |
| v2_adapter_tube.step | 8.6KB | |
| v2_adapter_tube.stl | 23.9KB | |
| v2_display_case.step | 48.4KB | |
| v2_display_case.stl | 40.1KB | |
| v2_display_frame.step | 168.8KB | |
| v2_display_frame.stl | 47.7KB | |
| v2_mount_plate.step | 77.9KB | |
| v2_mount_plate.stl | 78.0KB | |
| Verbindungsdeckel.stl | 40.9KB |
