OPEN IPC VRX Case V2 3D Printer Model
The file 'OPEN IPC VRX Case V2 3D Printer Model' is (stl,HEIC) file type, size is 35.7MB.
The file 'OPEN IPC VRX Case V2 3D Printer Model' is (stl,HEIC) file type, size is 35.7MB.
Hi this is my case for the Radxa zero 3w groundstation. for ruby i will add few more buttons or one 5way joystick ... if you have some ideas please use the comments.
thx @mario and all the other devs who spend their freetime in this awesome project
https://youtube.com/shorts/tRDIvCL1NRY?si=s689X7OcRg2gLxek
BOM:
-radxa Zero 3w 2gb
-rtl8812au or WiFi Transmitter that fits
https://s.click.aliexpress.com/e/_EQ6MLUn
-step down converter or Mini bec (3,3v for WiFi Board)
https://s.click.aliexpress.com/e/_EQ64b2F
-fan 2510 5v
-SMD 5way Joystick:
https://s.click.aliexpress.com/e/_EzCKMHN
-USB c connector
https://a.aliexpress.com/_Ex29qBp
4x M2 8mm for Case
4x M2 12mm for Fan
4x M1,7 4mm for radxa
-few Meter Filament of your choice 😉
update:
added new maincase with 5way switch on top , removed quick accse buttons and antenna holes.
| clip.stl | 16.9MB | |
| Extension.stl | 809.0KB | |
| Extension_for_more_antennas.stl | 1.1MB | |
| IMG_20240701_223330.HEIC | 1.5MB | |
| IMG_20240702_081132.HEIC | 1.1MB | |
| joystick.stl | 2.7MB | |
| LID_SMALL_v2.1_bl_m8812eu_2.stl | 41.4MB | |
| LID_SMALL_v3.stl | 36.1MB | |
| mount.stl | 9.8MB | |
| OPEN_IPC_VRX_maincase_v3.stl | 33.0MB | |
| OPEN_IPC_VRX_v2_lid_small.stl | 36.1MB | |
| OPEN_IPC_VRX_v2_lid_small_5way_switch.stl | 46.8MB | |
| OPEN_IPC_VRX_v2_lid_small_5way_switch_corrected.stl | 45.8MB | |
| OPEN_IPC_VRX_v2_maincase.stl | 61.8MB | |
| OPEN_IPC_VRX_v2__button3x.stl | 5.2MB |
