Open-Frame MATX MB With ATX PSU 3D Printer Model
The file 'Open-Frame MATX MB With ATX PSU 3D Printer Model' is (stl) file type, size is 56.3KB.
The file 'Open-Frame MATX MB With ATX PSU 3D Printer Model' is (stl) file type, size is 56.3KB.
This is a remix of open frame atx case with ATX PSU.
I added a holder behind the case for extra stuff that you need to merge on with zip tie (120mm radiator and fans in my case), it's also helpful to hide cable mess.
On the right side there is SSD holder screw holes, top two or bottom two should work. You don't want your ssd closer to case due to sata and power cable inserts.
I changed power and reset button hole into square, most of us migrating to this open case from regular computer case, so we'll use our old case's buttons.
There are two rounded holes for power and hdd lights. Regular led light should fit, bigger ones could require a bit drilling.
Between support bars I added M3 hex nut hole and M3 screw hole to add rigidity. I highly advice that you should use m3 hex nut and screw to put support pieces together. It'll work without it also, but why not?
PS:
This is my first thing to design, I did not even know about Fusion 360 1 month ago. So there is high possibility about design flaws on it, but it should get the job done, i'm using this case happily.
| ATX-Bar-Case-Beam_v1.stl | 2.6KB | |
| ATX-Bar-Case_v1.stl | 23.1KB | |
| ATX-Left-Bar_v11.stl | 34.0KB | |
| ATX-Right-Bar_v6.stl | 46.2KB | |
| ATX-Support-Bar-PW-Holder_v7.stl | 45.2KB | |
| ATX-Support-Bar-Rad-Holder_v11.stl | 59.8KB |
