Anycubic Kobra LCD TouchScreen protector with added One Piece Jolly Roger. May fit other Anycubic 3D printer models: Kobra Plus, Kobra Max and Vyper.
2 files should be printed in order and most likely need to be lined up.
When set up in Cura, I placed Color1 piece down first at 0,0,0 position and then laid Color2 down.
I adjusted the cover to line up with the logo (offset is x=0.9574, y=07117, z=0) then I sliced both files separately.
Printed the Jolly Roger part first in White. when done switched PLA out to Black.
Left it on plate and printed the cover (color2) in place and lined up perfectly.
Set print speed for Color1 to 35 for first layer.
You may need to sink Color1 Jolly Roger a few lines if your print head keeps knocking it out of place when you start printing Color2CoverPlate
No Build Plate Adhesion.
| Color1_OP_Jolly.stl | 1.7MB | |
| Color2_Anycubic_Kobra_LCD_Protector_OP.STL | 1.7MB |
![One Piece Flag [Keychain] 3D Printer Model](https://res.3axis.co/e5a3462a-9b26-4d5e-b4cc-2719b4bf0e5f/images/569f4dfb-ba74-4292-80d3-38f71758ace5_thumb.jpg)
