The Ooznest OX CNC Machine is based on the OX CNC Machine designed by Mark Carew of Openbuilds, and it incorporates many upgrades from the Openbuilds community.
The Ooznest OX CNC Machine makes full use of the V-Slot Extrusion system. It keeps the original extrusion layout used in the OX, plus Mark's built up spoiler board modification.
The kit uses a total of 30 Solid Delrin or Xtreme V Wheels, this includes the two extra wheels used on the extended Z-Axis. This Z-Axis V-Slot extrusion is 200mm.
The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. On the Y-Axis we have added an inner wheel brace, to improve performance and help to shield the wheels from cutting debris. We wanted no exposed extrusions, therefore we have designed custom NEMA23 threaded rod mounts, as well as Y-Axis end plates, and 20x40 end caps.
Our full kit uses the popular CNC xPro controller, with a cable carrier system for the X and Y Axis. As well as a 24V 350W Power supply with a complete cover with a volt meter and XT60 Outputs.
| cnc-xpro-fan-mount.stl | 273.3KB | |
| cnc-xpro-mount.stl | 321.6KB | |
| Drag-Chain-Length-Sizes.pdf | 30.3KB | |
| Electronics-Assembly-Manual.pdf | 11.9MB | |
| OOZNEST-OX-PARTS-LIST.xls | 31.0KB | |
| OOZNEST-OX-PLATE-DESIGNS.zip | 699.9KB | |
| OX-Assembly-Manual.pdf | 14.9MB | |
| psu-cover.stl | 329.7KB | |
| Router-Mounting-Assembly-Diagram.pdf | 347.7KB | |
| x-drag-chain-moving-end-mount.stl | 109.1KB | |
| y-drag-chain-fixed-end-mount.stl | 54.0KB | |
| y-drag-chain-moving-end-mount.stl | 80.2KB |
