Oogie Boogie Dice Box 3D Printer Model
The file 'Oogie Boogie Dice Box 3D Printer Model' is (stl) file type, size is 5.3MB.
The file 'Oogie Boogie Dice Box 3D Printer Model' is (stl) file type, size is 5.3MB.
My wife joked about wanting a giant Oogie boogie dice to keep her dice in, and now here we are.
box is a 130mm (approx) cube with 100mm (approx). interior space
i have done my best to make this as easy to make as i can, the gaps are .5mm so consider this if you choose to scale it.
the one pictured was made in pieces but i added a file for the box as a single piece cos theres always someone with a massive resin printer lol
added the clamping guide as something i wish i had when i was assembling the one pictured.
also the one pictured is felt lined, I had glued the felt while the sides were separate and would recommend the same to anyone that wished to line theirs.
one pictured was coated in resin to fill gaps due to warping and remove layer lines, i used epoxy at the time but would recommend the UV stuff now
one pictured uses the top joint cover, again warping, my old print bet surface sucked.
some sanding may be required this thing is way too big for me to make test prints of
| Dice_Body_whole.stl | 25.9MB | |
| Dice_clampguide.stl | 1.4MB | |
| Dice_side1.stl | 2.5MB | |
| Dice_side2.stl | 2.5MB | |
| Dice_side3.stl | 2.7MB | |
| Dice_side4.stl | 4.0MB | |
| Dice_side5.stl | 17.1MB | |
| Dice_side6_lid.stl | 5.4MB | |
| TopJointCover_Optional.stl | 147.9KB |
