Oni Cyber Punk Mask / Komplett 3D Printer Model
The file 'Oni Cyber Punk Mask / Komplett 3D Printer Model' is (stl) file type, size is 16.4MB.
The file 'Oni Cyber Punk Mask / Komplett 3D Printer Model' is (stl) file type, size is 16.4MB.
UPDATE: PLEASE USE THE NEW UPGRADED VERSION WITH MORE ANKERPOINTS
https://www.thingiverse.com/thing:4629576
If you already printed the Mask I made an Addition for the old design so you can mount a second strap to it: https://www.thingiverse.com/thing:4635203
STOP: Read this first and then go to the new Version :D
I had sever problems to fit the single pieces together and ended up with gaps between the parts. And it also took almost 17h to print.
I put the parts all together and adjusted the Cura settings to get the mask in ONE Print and in just under 8h.
Using Tree supports and 0.25 layer hight worked perfectly.
Thanks to the Designer for this amazing mask. I just made it a bit easier to print.
Scale down to 10% in Cura.
| Oni_mask_ganz.stl | 19.1MB | |
| Teeth.stl | 2.8MB |
