This started as a project to upgrade my Tronxy X5S to a tool-changing set up, but quickly evolved into a custom complete redesign. Only Tronxy parts left are the frame extrusions.
With this redesign, the aluminum extrusions can easily be changed for longer ones to increase the build volume along X, Y, and Z. Simply change the extrusions to the desired length, and swap out the respective linear rails (and ballscrew), to an appropriate length.
Once parts are completed, printed and installed on my machine, they will be uploaded, including a detailed change log. The most current part version will completely replace the previous, unless there is good reason to keep the old version alongside the new. If you need an old part version I do keep them...
Try out my design for yourself and please feel free to contact me for any and all questions, suggestions, issues, requests, or fixes. I will be happy to create a new part for a specific hotend or tool you may need, or make reasonable modifications to any existing part.
| Ballscrew_Bed_Mount_v2.stl | 588.7KB | |
| Ballscrew_Bottom_Mount.stl | 133.3KB | |
| Ballscrew_Top_Mount_v2.stl | 98.1KB | |
| Bed_Brace_v3.stl | 1.7MB | |
| Bed_Z_Rail_Mount.stl | 283.2KB | |
| Changer_Belt_Block_v5.stl | 886.8KB | |
| Changer_Sled_v5.stl | 481.9KB | |
| Corner_Idler_v4.stl | 443.0KB | |
| Duet_Mount_v1.stl | 463.9KB | |
| End_Cap_2020_v1.stl | 105.0KB | |
| End_Cap__2040_v1.stl | 156.9KB | |
| Extruder_Motor_Mount_v1.stl | 180.8KB | |
| Frame_Foot.stl | 225.3KB | |
| MOSFET_Mount_v2.stl | 87.8KB | |
| PanelDue_Front_Panel_v1.stl | 107.7KB | |
| PanelDue_Hinge_Extrusion_Mount_v1.stl | 1.2MB | |
| PanelDue_Hinge_Inner_Link_v1.stl | 72.5KB | |
| PanelDue_Hinge_Outer_Link_v2.stl | 449.3KB | |
| PanelDue_Hinge__Mounting_Plate_v1.stl | 987.9KB | |
| PanelDue_Rear_Housing_v2.stl | 292.5KB | |
| PanelDue_Stylus.stl | 165.6KB | |
| Spool_Holder_Base_v2.stl | 1.1MB | |
| Spool_Holder_Nut.stl | 1.1MB | |
| Tool_Dock_v3.stl | 908.0KB | |
| Tool_E3DV6_Clamp_v2.stl | 280.0KB | |
| Tool_E3DV6_Housing_v3.stl | 687.2KB | |
| XY_Motor_Mount_v2.stl | 154.2KB | |
| Y_Sled_v2.stl | 241.2KB | |
| Z_Rail_Extrusion_Bracket_v1.stl | 783.1KB | |
| Z_Rail_Extrusion_Spacer.stl | 39.7KB |
