Prints as one piece, no supports, in theory no brim nor skirt
@0.1mm layer
Split the parts and trim the excess. You can choose either open vent or fuel line to fuel line vent.
Drop a 6mm bb in and take a tiny o-ring (Rc shock seal type) glue the bottom part of the o-ring in the channel, then seal both part with glue
NO GLUE ON THE O-RING (bb side) OR THE VENT HOLES, THE BB HAS TO MOVE FREELY TOO
| one_way_valve_vent_tank.stl | 2.0MB |
