Introduction:

One piece Sukhoi Su-47 Berkut multicolor supersonic jet fighter. One of the most famous aeroplanes with “backward wings”. I am a fan of the Ace Combat series and this was one of my favourites growing up :)

Credits:

Thanks to the amazing work from @fady modelling this iconic fighter jet! I just made it easier to print and added the colors :)
https://www.printables.com/model/921914-one-piece-su-47-multicolor-aircraft

Printing details:

Layer height: 0.12mm

Material: PETG Prusa Galaxy black, signal white and lipstick red

Supports: Tree, organic, auto, 40 degrees threshold, build plate only

Print time: 27 hours

filament consumption: 281g (the aeroplane is 22 cm long)

Infill: None if printed at >45 degrees nose up in the sky

Orientation: printed at >45 degrees nose up in the sky

All these parameters are already set up in the bambustudio .3mf file :)

Assembly instructions:

None! This is an assembly-free model with the downside of using supports :)

Support removal:

I found the supports to be extremely easy to remove at 0.12 mm. They mostly removed themselves when I bent the build plate :)

It was significantly harder at 0.3mm layer height when I did my “quick” initial print test, so you may want to keep the layer height low to get a good finish and easy support removal.

Support me on Patreon! (if you really want to):
https://www.patreon.com/Namiiria3DPrints