One Piece Harry Potter Wand 3D Printer Model
The file 'One Piece Harry Potter Wand 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'One Piece Harry Potter Wand 3D Printer Model' is (stl) file type, size is 1.6MB.
I remixed this from a thing that seems to be gone. It was in 3 pieces, and I needed 1 piece. But my source thing was also a remix, and I am now linking directly to the primary source.
My Cetus printer is tall enough to print this wand in one piece. So I joined the pieces together. I printed standing up with supports.
This wand has a channel through it and a space at the base. The purpose is to put an LED at the top and a 2032 battery at the base. I soldered two strands of the solid telephone punch block style insulation displacement copper wire to a color changing LED. The wires stick out the back. Then I force the battery into the end, and the insulation is cut and makes a connection.
The battery will be on all the time this way. If you don't force the battery all the way in, you can pull it out to turn the LED off. I have not tried it, but I also put a little hole on the side to offer a chance to push the battery out from the inside.
Amazon sells LEDs like this: https://www.amazon.com/Full-Multi-color-Slow-Flashing/dp/B01AT5EAPQ
2032 Batteries: https://www.amazon.com/Energizer-Lithium-Battery-Original-Packaging/dp/B00FO9HQLS
| One_piece_Harry_Potter_wand.stl | 3.5MB |
